THE B2B PLATFORM OF NEW AND SECOND-HAND WINE EQUIPMENT
biggest in Europe

FAI ACCOMPAGNARE I MESSAGGI DEI NOSTRI UTENTI CON
I TUOI VINI RAPPRESENTATIVI...6 MESI POI DECIDI SE RIMANERE

Information request

RIF.6925 | Autoclavi hl 25 in acciaio inox

Autoclavi hl 25 in acciaio inox

PRE-SEASONAL BATCH OF N. 10 AUTOCLAVES 25 HL
BOOKINGS UNTIL STOCKS LAST - THE PRICE IS EACH

AISI 304 STAINLESS STEEL
EXCHANGE POCKET SYSTEM WITH PATENTED SPIRAL DESIGN, RESTING ON LEGS COMPLETE WITH INSULATION

DIMENSIONS:
External diameter : ~1200 mm (D) + (200 mm insulation) = 1400 mm external
Cylindrical part height : ~2000 mm (HF)
H legs : ~700 mm (HG)

MATERIALS:
Plating : AISI 304 stainless steel
Bottom: Domed AISI 304 stainless steel
Roof : Domed AISI 304 stainless steel

SURFACE FINISHING
Internal tank : 2B plating (rolling mill polish) Roof and bottom with fine satin finish
Tank exterior : Insulation Coating 2B (roll mill gloss)
These finishes are guaranteed with adhesive plastic film protection before starting any process.

WELDS
The welds are performed with automatic and manual T.I.G. with inert gas protection (Argon)
on both sides of the joint, at full penetration, pickled and washed Fine grinding and brushing of the natural heels
internal and external. Flattening of the welds of the plating by cold rolling.

STRUCTURE
Structure suitable to support the nominal capacity with a density of 1.1 kg/dm3 + overpressure according to
6 BAR approval according to 97/23/CE P.E.D. Design and certification in accordance with EN ISO 13445 standards.

COMPONENTS
- N°4 pyramidal support feet made from folded sheet metal equipped with adjustable feet with thread and plate
Ø120 for floor support.
- Lifting eyebolts applied on the roof.
- Elliptical door in AISI 304 certified P.E.D., located on the lower part of the plating with internal opening /
external
- DN50 total drain with stainless steel ball valve, DIN50 connection.
- DN50 partial drain with stainless steel ball valve, DIN50 connection.
- Arrangement for connection for DN50 agitator with stainless steel ball valve, DIN50 connection, inclined
towards the bottom of the tank (DN50 removable agitator excluded)
- Internal replacement pipe DN50 with stainless steel ball valve, DIN50 connection
- DIN DN50 fitting complete with blind swivel on the center of the roof
- Sample tap with ball valve.
- Level group with stainless steel needle valve, ø 16 polycarbonate tube, steel protection, return
superior.
- Analog thermometer.
- Well for temperature probe.
- N°1 heat exchange pockets applied to the plating made in a cavity by spot welding with argon gas protection complete with inlet/outlet fittings for the carrier fluid.
- KZE system with pressure gauge and PED 6 bar approved pressure safety valve
- Total insulation in double layer polyurethane panels with staggered joints th. total 100 mm, injected bottoms th. 100 mm, riveted finish in flowered AISI304.
- Insulated inner door in AISI304
- CE marking and type certificate according to European Directive 97/23/CE



NUOVO GESTITO

Information request

If you have not yet registered and therefore are not allowed to view and/or book in real-time and benefit from the assistance of our "safe purchase formula" , fill in the form below with a detailed request. Our staff will answer within 24h.
Ask information to Enonetexpo:




See price / Make your counteroffer

In order to avoid wasting time and have real-time information on MANAGED ADS, to make a counteroffer for the purchase, and to rely on the full assistance provided by our staff, (all of this is guaranteed by the “SAFE PURCHASE FORMULA”) you have to SIGN UP.

I already have an EnonetExpo.com account, LOGIN >

For more information call 392 522.00.71 or send a mail to info@enonetexpo.com